0.5 mm aluminium + 3 mm Polyethylene Core + 0.5 mm aluminium


SARAY 4 MM Thickness Alloy Coating
Upper Surface Aluminium 0.50 mm 3003 H16 PVDF Coated
Core 3.00 mm Polyethylene Core
Lower Surface Aluminium 0.50 mm 3003 H16
Total Weight : 5.85 kg/m2

Saray ACP consists of a white-coloured low density polyethylene core bonded between two Aluminium alloy sheets. Aluminium sheets can be coated with PVDF or Polyester paint. Saray Composite Panels are mainly used for external cladding of buildings (building facades), and for signage.

Saray Aluminium Composite Panels are very rigid and strong despite its light weight. Aluminium sheets are painted in any kind of colour, in PVDF or Polyester coatings, including a wide range of metallic and non-metallic colours as well as patterns that imitate other materials, such as wood or marble.

Applications of Saray ACPs are not limited to external building cladding, but can also be used in any form of cladding such as partitions, false ceilings etc. Aluminium Composite Panels are also widely used within the signage industry as an alternative to heavier, more expensive substrates.

Saray Aluminium ACPs are available in 3 mm, 4 mm and 6 mm thickness and all are easily cut, bent, drilled and formed with standard hand / industrial tools depending on application.

0.4 mm aluminium + 3.2 mm polyethylene filler + 0.4 mm aluminium


ALUFACE-FR consists of a fire-retardant mineral core bonded between two Aluminium alloy sheets. Aluminium sheets can be coated with PVDF or Polyester paint. ALUFACE-FR Composite Panels are mainly used for external cladding of buildings (building facades) where resistance to fire is important and specified by directives or law.

Fire rating of materials are classified by EN 13501-1 and DIN 4102 standards. ALUFACE-FR is classified as class B according to EN 13501-1 and B1 according to DIN 4102, by MPA Dresden and ODTU/METU Laboratories respectively.

ALUFACE-FR is painted in any kind of colour, in PVDF or Polyester coatings, including a wide range of metallic and non-metallic colours.

ALUFACE-FR ACPs are easily cut, bent, drilled and formed with standard hand / industrial tools depending on application.

0.25 mm aluminium + 2.5 mm or 3.5 mm polyetylene core + 0.25 mm aluminium


SARAY ALUBOARD 3 MM - 4 MM Thickness Alloy Coating
Upper Surface Aluminium 0.25 mm 3003 H16 Polyester Coated
Core 2.50 mm - 3.50 mm Polyethylene Filler
Upper Surface Aluminium 0.25 mm 3003 H16 Epoxy Polyester Coated
Total Weight : 3.90 kg/m2 - 5.22 kg/m2

Aluboard panels are developed by bonding the two corrosive resistant aluminum plates using polyethylene in between. The front aluminum is dyed with Polyester paint, and the reverse surface is dyed with epoxy polyester. Aluboard is used intensively in advertising panels with its modern look.


Advantages

  • Dyed surface perfect for printing
  • Light-weight, high strength, rigid and flat surface
  • Acid and alkali resistant
  • Wide range of colors
  • Easy maintenance and cleaning

Technical Characteristics

  • Panel Thickness: 3 mm / 4mm
  • Panel Width: 1250 mm,1500 mm
  • Panel Length: 3200 mm standard (Max 6000 mm)
  • Aluminum Thickness: 0.25 mm

Applications

  • Traffic Signs
  • Billboards and advertising signs
  • Other industrial applications

Composition

  • Polyester Coating
  • Aluminium = 0.25 mm
  • Aluminium = 2.5 mm / 3.5 mm
  • Aluminium =0.25 mm
  • Epoxy Polyester Back Coating